{{ kicker }}

{{ title }}

Introductory Operator Course

Compressed Air Foam System Operations

The TRI‑MAX 30 uses compressed air to propel firefighting foam — producing thousands of tight-radius bubbles that cool and smother fire with a vapor-sealing blanket. This course covers the system’s general information, specifications, components, and normal operating procedures, plus the critical safety warnings every operator must know.

{{ s.value }}
{{ s.label }}

5 modules · ~15 minutes · Source: TRI‑MAX 30 Operations, Training & Maintenance Manual (V.10.13), Kingsway Industries Inc.

The TRI‑MAX 30 Compressed Air Foam (CAF) fire-suppression system uses compressed air to propel firefighting foam. Thousands of tight-radius bubbles quickly cool and smother a fire by laying down a thick, vapor-sealing blanket that virtually eliminates re-ignition. The foam adheres to both horizontal and vertical surfaces, and can seal a fuel spill and flammable vapors to reduce or eliminate a potential fire.

{{ f.big }}
{{ f.text }}

How It Works

  • Compressed air propels finished foam up to ~65 ft in no-wind conditions.
  • Foam cools and smothers fire, forming a vapor-sealing blanket.
  • Operators without protective clothing can stand off to avoid thermal injury.
  • The operator can easily service the system in the field.

Good To Know

  • Full discharge of ~600 gal of finished foam takes ~1.5 min wide open.
  • Cold weather (Freeze-Protected Foam at −40°): expect ~25% less distance due to higher viscosity.
  • Trained personnel perform all maintenance except hydrostatic testing of the air cylinders, premix tank, and discharge hose.
  • When transporting, secure the unit fully and use only the towing eye / frame — never push on gauges or regulators.

Key technical specifications for the TRI‑MAX 30. Memorize the headline figures — they appear in the knowledge check.

{{ g.name }}
{{ row.label }} {{ row.value }}

Select a component to read what it does and how it should be positioned. Knowing each valve’s open/closed orientation is essential to safe operation.

[ PLACEHOLDER ]
DROP COMPONENT PHOTO / DIAGRAM CALLOUT {{ selectedComp.n }}
{{ selectedComp.n }}

{{ selectedComp.name }}

{{ selectedComp.desc }}

Position · {{ selectedComp.tip }}
⚠ Warning

The TRI‑MAX 30 discharges foam at high pressure. A sudden pressure surge can make you lose control of the hose if the nozzle and hose are not held securely. Open the nozzle slowly to the full open position. Consult the foam manufacturer’s MSDS if foam contacts the eyes, nose, or mouth.

Step {{ opStepNum }} of {{ opStepTotal }}
Note: air cylinders are normally left closed
{{ opStep.letter }}

{{ opStep.title }}

{{ opStep.text }}

Tip · {{ opStep.tip }}

The manual uses three signal words. Know the difference — and know the emergency actions cold.

⚠ WARNING = risk of injury or death ⚠ CAUTION = risk of equipment damage ⓘ NOTE = essential highlight
{{ s.label }} · {{ s.topic }}

{{ s.text }}

Shut-Down Procedure

{{ st.n }} {{ st.text }}
Your Score
{{ scoreText }}
{{ scoreMessage }}
{{ q.num }}

{{ q.q }}